基于wincc自动洗车监控系统设计大学本科论文.docVIP

吉林化工学院毕业设计说明书 基于WinCC自动洗车监控系统设计 Design of Automatic Vehicle Cleaning Simulation System Based on WinCC 学生学号： xxxxxxxx 学生姓名： xxxxxxxx 专业班级： xxxxxxxx 指导教师： xxxxxxxx 职 称： xxxxxxxx 起止日期： 2013.03.04～2013.06.23 吉 林 化 工 学 院 Jilin Institute of Chemical Technology摘 要 随着中国汽车市场的快速发展，汽车保有量的不断增加，汽车后市场也在快速的发展之中。汽车工业发展迅速，随着汽车保有量的增加，汽车维修保养行业也迅速发展，许多企业都在角逐国内汽车维修保养市场。国内洗车机设备性能不够稳定，故障率高，外观设计存在抄袭，粗糙等弊端。Abstract With the rapid development of China’s auto market ,car ownership is increasing gradually, which leads to fast developing of the automobile after-sales market. Under the circumstances of rapid development of automobile industry ,as well as the increase of the auto possession, car maintenance industry has won fast progress as well, which leads to fierce competition among enterprises to meet the competitive challenges of car maintenance market in domestic. At present, there are many shortcomings with regard to domestic car washer equipment performance, such as not stable enough, high failure rate, plagiarized exterior design and rough performance, etc.. Against the background of Siemens WinCC, the paper give comprehensive analysis about the technological characteristics, technical parameters and control difficulties of automatic car washing process. Then, we can determine the automatic control scheme and conduct system simulation, joint debugging and operation about the automatic car-washing control system. We have Complete the task of flow chart drawing, database establishment, dynamic link, screen switching and the design of fault and alarm system of the automatic car-washing control system. Furthermore, we have achieved the goal of automatic hand switching during the car-washing process, as well as pre-washing, foam flushing, rinse and air drying, etc.. Key Words：Car Washer；Control Scheme；Automatic Control 目 录 摘 要 I Abstract II 第1章 绪论 1 1.1 全球洗车行业发展现状 1 1.2 洗车机分类 2 1.3 洗车方法研究 3 1.4自动洗车的优点 4 1