I-用访问列表初步管理 IP流量.pptVIP

Slide 1 of 1 Purpose: Emphasize: Slide 1 of 1 Purpose: Emphasize: Explain the basic rules on where to configure standard and extended access lists. Describe how the extended access list can eliminate unwanted traffic across the serial lines. Slide 1 of 1 Purpose: This slide shows how to verify an access list. Emphasize: Lists IP interface information. Indicates whether outgoing access list is set. Review the output of the show ip interface command. The highlighted text shows details about access list settings in the show command output. Slide 1 of 1 Purpose: This slide introduces the show access-lists command used to verify access lists. Emphasize: This is the most consolidated method for seeing several access lists. Note, the implicit deny all statement is not displayed unless it is explicitly entered in the access-list. Slide 1 of 1 Purpose: Emphasize: Use the summary page items to review the chapter material you presented. Slide 1 of 1 Purpose: Emphasize: Notes: Refer to the appendix for answer to the review questions. Slide 2 of 2 Purpose: Emphasize: Layer 2—Adds the general form of the interface command. This links the previously specified interface to a group that will handle its packet for the protocol in the manner specified by the global access list statements. It can help student understanding to learn a generalized command as a simplified template common to most access list processes. However, the details for specific access lists vary widely. As you present the global access list command material that follows in this chapter, return to the template term “test conditions” if it helps your students associate variations to the general elements of this model. Emphasize that “test conditions” is an abstraction for this course. Use this abstraction as a generalization to assist teaching and learning. The words “test conditions” are not a Cisco IOS argument or parameter. Cisco IOS software also offers many variations fo