cnckad g代码说明(外国英文资料).docVIP

cnckad g代码说明(国外英文资料) AMADA CNC punching machine G code, M code description FPC shear punch 2010-06-20 22:46:33: CNC learning | : | for large and small subscriptions AMADA tiantian CNC punching machine The following is suitable for AMADA numerical control press reference NCT instruction is introduced The NCT program is a digital information file composed of basic instructions in a certain format. The program writes in a fixed format, and the NCT programs line (a BLOCK) is shown below: N___ G___ The instructions for individual commands do not have to be entered. The basic format and basic application of the instructions commonly used in NCT programs are described below. G92 setting (origin setting) Format G92 X___ Y___ Materials from the point of origin to the distance from the center of the punch, the memory in the NC device, the origin basis is different with NCT model. The use of machine tools is VIP357, its origin of coordinates is X 1830, Y1270. G90 absolute coordinates instructions Format G90 X___ Y___ G90 absolute coordinates instructions when using, must be in front of the coordinates of the G90. In absolute coordinates reading instruction, if credited G90, beginning the next BLOCK, can omit sun city agent not written until G91. Application without G90 or G91, shall be regarded as the same as the G90. The G91 is relative to the coordinate command The coordinates specified by the G91 instruction are not calculated from the origin, but the added value from the previous one, which must be recorded in the G91 before the target value is used. When the relative coordinates command is read, the G91 is initially recorded in the G91, which is omitted from the G91 until the G90 appears. G50 reverted to the origin instruction Using the G50 command, the material reverted to the initial state of the NC at the same time as specified in G92, and the program must be input to the G50 single line. The G70 does not punch the instructions Format G70 X___ Y___ The G70 or G91 can