11.四层弹簧-质点模型的地震分析(国外英文资料).doc

11.四层弹簧-质点模型的地震分析(国外英文资料) Includes frequency analysis, spectral analysis and time analysis Author: lu xinzheng, civil engineering department of tsinghua university FINI / CLEAR / UNITS, SI / PREP7 DAMPRATIO = 0.02! The vibration damping coefficient is 0.02 ET, 1, BEAM188 KEYOPT, 1,7,1 KEYOPT, 1,8,1 ET, 2, MASS21,,, 4 MP, EX, 1210 E9 MP, NUXY, 1,0.3 MP, DENS, 1780 DAMPRATIO MPDATA, DAMP, 1 SECTYPE, 3, BEAM, I SECDATA, 0.2, 0.2, 0.5,.01, 0.01, 0.008 R, 1,1.6e2, 1.6 e2 R, 2,1.2e2, 1.2 e2 K, 1,0,0,0 K, 2,0,3,0 K, 3,0,6,0 K, 4,0,9,0 K, 5,0,12,0 K, 6,0,0,10000 L, 1, 2, L, 2, 3 L, 3, 4 L, 4, 5 LSEL,,,, 1, 4 LATT, 1, 0, 1, 6, 3 ALLS LESIZE, ALL, 3, 1 LMESH, ALL NUMMRG, ALL NUMCMP, ALL The TYPE, 2 REAL, 1 E, 2 The TYPE, 2 REAL, 2 E, eight E, 14 E, 20 * SET, NT, 1001 * SET, DT, 0.02 * DIM, AC, and NT * VREAD, AC (1), RECORD, TXT (F8.3) / SOLU D, one and ALL, ANTYPE, 0 SOLVE FINISH / SOLU! The modal analysis ANTYPE, 2 MODOPT, SUBSP, 8 MXPAND, 8, 1 SOLVE FINI ! You get a self oscillator frequency one * GET FREQ1, MODE, 1, FREQ / ESHAPE, 1.0 / SOLU ANTYPE, SPECTR! Spectrum analysis SPOPT, SPRS Mashed, 1, DAMPRATIO, SED, 1 SVTYPE, 2, 1 FREQ, 0.167, 0.25, 0.333, 0.44444, 0.5, 0.667, 1,1.25, 1.667 SV, 0.154350625, 0.191590625, 0.210210625, 0.224175625, 0 0.329514922, 0.484352764, 0.598723486, 0.786897371 FREQ, 2.222, 10100, 10100 SV, 1.034212766, 1.034212766, 0.3528 ! The earthquake affected 0.08 first group III site TG = 0.45 SRSS, 0.01, DISP SOLVE FINISH / POST1 / INP, MCOM NSORT, U, SUM * GET, DMAX_SPE, SORT, MAX! The maximum distortion of the reaction spectrum ! Initial earthquake calculation FINISH / CONFIG, NRES, 20000 / SOLU ANTYPE, TRANS TRNOPT, FULL ALPHAD, 2 * DAMPRATIO * 2 * 3.1415926 BETAD, 2 * DAMPRATIO/(FREQ1 * 2 * 3.1415926) * to DO, I, 1 1100 ACEL, AC (I), 0, 0 At the TIME, I * 0.02 OUTRES, ALL, ALL SOLVE * ENDDO FINISH / POST26 The FILE NSOL, 2, 20, U, X, PLVAR, 2, STORE, the MERGE XVAR, 1 PLVAR, 2, * GET, DMAX_TRANS, VARI, 2, EXTREM, VMAX. The time path