二级保养(国外英文资料).docVIP

二级保养(国外英文资料) Basic operating rules for the secondary maintenance of Charley cars Applicable car: Charley TJ7100, tj7130/7131, TJ7136U2000. The secondary maintenance period of the Charley series; 15000 km. The Charley series is the second class maintenance basic operating procedure. Charley secondary maintenance basic work schedule The serial number Maintenance projects Job content The technical requirements one Engine oil and oil filter 1) oil change 2) replace the oil filter 3) check the oil pressure and alarm device 1) oil specifications; The TJ376Q engine, the HC - C engine is APISE, and the 8a-fe engine is APISH, EC - II or sj-class, EC or ILSAC multi-grade oil; The lubricating oil viscosity level (SAE standard) is chosen according to the ambient temperature The oil filter should be injected into the oil before installation, and the assembly shall be reliable and sealed 3) when the engine preheats, the oil and oil leakage should not be due to oil under the shock load 4) the liquid level is high: the L and F should be marked in the oil ruler when the cold car is cold 5) engine oil total: 3.5 L 6) engine oil pressure standard value: 8a-fe engine, idle time 49kPa, 3000r/min is 294 ~ 539kPa. The hc-c engine is 196kPa at idle and 245 to 490kPa for 3000r/min 2 Air filter 1) clean air filter case 2) replace the air filter cartridge 3) check the sealing of the thermostat and inlet system The air filter is clean, effective, well sealed and reliable 2) the gas valve works effectively and the intake system is not leaking 3) replace the air filter cartridge for 30,000km 3 Engine belt and wheel 1) check the belt and wheel appearance 2) check for the deflection and tension of the belt 1) the belt should be free of cracks and excessive wear and no oil on the surface, replacing the cycle: 100,000 km of imported belt and 40,000 km of domestic transmission belt 2) the power transmission belt of the generator has a new band of 7 ~ 9mm, with an old belt of 11.5 ~ 13.5 mm. After in