光敏电阻(国外英文资料).docVIP

光敏电阻(国外英文资料) The photosensitive resistance also called light guide materials commonly used for cadmium sulfide, and selenium, aluminium sulfide, lead sulfide and bismuth sulfide materials. With these materials in light of specific wavelength characteristics, its resistance decreases rapidly. This is because the light generated carriers are involved in conducting, under the effect of drift motion of the applied electric field, electronic power supply to the positive, negative to the hole power, so that the photosensitive resistor values decreased rapidly. Form Is a photosensitive resistor resistor resistor made of photoconductive semiconductor using the value of the incident light intensity change, also known as the photoconductive detector; incident light intensity, resistance decreases, the incident light is weak, resistance increases. Edit this paragraph Effect Photosensitive resistors are generally used for control measurement, light and photoelectric conversion (light changes into electrical changes). The commonly used photosensitive resistor CDs photoresistor, it is made of semiconductor materials. The photosensitive resistor values with incident light (visible light) intensity changes, in dark conditions, its resistance (dark resistance) up to 1~10M in Europe, in the light conditions (100LX), its resistance (resistance to light) only hundreds of thousands of ohms. The sensitivity of photosensitive resistor to light (i.e. spectral characteristics) and eye on the visible light response m (0.4~0.76) is very close, as long as the human eye can feel the light, it will cause the resistance change. Design of light control circuit, use incandescent bulbs (small bulbs) light or natural light as light source control, which greatly simplifies the design. Edit this paragraph Specifications Usually, all made of thin photosensitive resistor structure, in order to absorb more light energy. When it is struck by light, (Guang Minceng) in a semiconductor wafer Photoresistor con