塑料答案(国外英文资料).doc

塑料答案(国外英文资料) 0715900 what are the main molding methods of thermoplastics and what are the main forming methods of thermosetting plastics? The main molding methods of thermoplastics are injection molding, extrusion molding and hollow forming. The main molding methods of thermosetting plastics are compression molding, injection molding and solid phase forming. 00 what is the weld line? What is the effect of weld line of plastic parts quality? A region of plastic products formed by fusion and solidification of separated plastic melts after contact with each other is called a fusion joint, also known as a knot. The mechanical properties of the weld line is lower than other areas of plastics, is a weak link in the whole plastic. The weld line strength is usually plastic strength. 00 what are the factors that affect the dimensional accuracy of plastic parts? Many factors affect the dimension precision of plastic parts, such as mold manufacturing precision and wear. After use of plastic shrinkage rate of the passive, changes in process conditions, the shape of plastic parts, flash thickness fluctuations, draft and after molding plastic parts size change. What factors influence the surface quality of 00 plastic parts? The surface quality of plastic parts includes surface roughness and apparent quality. The surface roughness of the plastic parts is mainly related to the roughness of the mold cavity surface. The quality of plastic parts refers to the apparent defects after molding, such as common missing material, overflow, flying edge, depression, blowhole, weld line, crazing, speckle, warping and contraction, dimensional instability, etc.. It is due to plastic parts forming process conditions, plastic molding, the choice of raw materials, mold design and many other factors. 00 pieces of plastic on why design draft? Draft the value and what factors? Because the plastic is cooled and contracted, it is tightly wrapped on the punch or shaped core, or because of the adhesive act