学习方法(国外英文资料).docVIP

学习方法(国外英文资料) Interpretation of clinical test report form The Central Laboratory of No.1 Peoples Hospital of Hangzhou Wang Ziwei clinical inspection report is the final clinical laboratory work, only the timely and correctly interpreted, can make its information reflect the full value. The following is an introduction to some important common inspection reports. The basic knowledge and clinical inspection report of 1, clinical inspection report content (1) patient information, including name, gender, age, number of visits, diagnosis, physicians, billing date (2) specimen information, fasting / postprandial (venous) blood, blood, serum / plasma, urine (3) determination of the information, including the project, the unit of measurement (reference value) / normal results (4) inspection information, including name, hospital and laboratory inspection and check, test date and time, 2 (reference value) / normal results reference value is to a certain number, with a clear background (can be distinguished from the positive status of the population) measured results, after statistical treatment (including 95% measured values obtained range). Sometimes the results of qualitative measurements are replaced by normal results instead of reference values. In clinical applications, but also the medical decision level or critical value (Cutoff), medical decision level means the comprehensive analysis of the reference value distribution and pathological value and clinical experience with experts and make, can be used as a clinical treatment threshold. The results of the tests will cause errors due to physiological variations and experimental variations, and medical decision making can often avoid erroneous treatment. For example: glucose reference value is 3.6~6.1mmol/L, if 7.0mmol/L can be considered as diabetes, fasting blood glucose, 2.8mmol/L hypoglycemia; serum potassium reference value is 3.5~5.3mmol/L, if 3.0mmol/L is low blood potassium, and should be treated, 5.8mmol/L should