汽车故障诊断实验指导书(国外英文资料).docVIP

汽车故障诊断实验指导书(国外英文资料) The document comes from the network, it is oneself collect to organize, if have omission, mistake, still ask everybody to correct! Auto fault diagnosis experimental instruction Editors wit The year of the Lord Guangdong electromechanical technical college Experiment one engine output power test and idle test (2 hours) One, the purpose of the experiment The performance of the engine and the operating stability of the engine in idle state are evaluated to determine the emission value of the waste gas in the idle state to assess the performance of the engine Understand the general method of engine performance evaluation Equipment and instruments Experiment with engine (gasoline engine) and technical data Waste gas detector Speed measuring instrument 4, a stopwatch Third, experimental procedure and principle Starting engine to achieve normal working condition (check water temperature and idle condition) The idle speed of the observed engine should be around 750 RPM Measure engine speed up time Method is turned to the throttle quickly, engine speed will rise rapidly, with a stopwatch to record starting quickly open the valve, until the engine speed the time required for up to 3500 RPM Note the engines speed over 3,500 RPM, and then release the throttle to return to idle state, lest the engine damage The engine speed increase will indicate the maximum power of a particular engine, the shorter the time, the greater the engine power The maximum power of the starting motive is calculated by comparing the mean time and the standard time Formula: G = t/t . G t The speed up time of the engine (standard value) G The maximum power (standard value) of the engine t The speed of the engine measured in the test is up G: the power of the test engine Determine the exhaust pollutant of gasoline engine in idle state Use instrument: waste gas tester Experiment of engine output power test and idle test Lab report The class name of ___________ ____________ hold student i