汽车起重机的常见故障诊断和排查(国外英文资料).docVIP

汽车起重机的常见故障诊断和排查(国外英文资料) 17 Vehicle maintenance and repair 2010.6 Car clinic AUTOMOBILE MAINTENANCE Remove the forcing down switch and press the switch manually. If the contact can be closed after the switch, the explanation is open Improper installation should be re-adjusted; If you press the The switch contact is not closed, indicating that the switch is damaged. Check the working condition of forced downshift electromagnetic valve. Remove the body and break down the cleaning force drop control Valve, if there is a problem with the valve core, it cannot be repaired The body assembly should be replaced. Eleven, conclusion Electromechanical dimensions of automotive maintenance enterprises The repair worker is in the auto electric control automatic transmission During the diagnosis and maintenance of the obstacle, the fault should be based on the fault Start with a routine inspection project and base on it The fault code hint, from the outside to the inside, from the surface, First, the principle of disintegrating is automatically changed In the case of not breaking up, the above method is adopted To determine the cause of the automatic transmission failure And determine the approximate range to achieve the exact location Purpose. So you can reduce troubleshooting time, Lower the rate of rerepair and increase the car Maintenance enterprise benefit. - A car crane is a widely used one Engineering machinery, due to the use of wheel crane It is inferior, so the accident rate is higher, right The failure to occur must be eliminated in time Crane is not allowed to work. Hydraulic wheel up Failure of heavy machine, mechanical failure, electrical fault Three kinds of problems with hydraulic system failure. Crane hydraulic system The crane is powered by hydraulic efficiency Various hydraulic units. Crane hydraulic system See troubleshooting and troubleshooting as follows: The pressure did not rise Check the oil tank: if the oil is low Whether the hydraulic oil is spoiled or wh