物理三导答案(国外英文资料).docVIP

物理三导答案(国外英文资料) The longer this property is made. Case in question: What should be noticed in the use of spring dynamometer? A: spring dynamometer should be clear in use: before measuring, the needle should aim at zero, zero. The application should specify the range and the value of the spring dynamometer. When measuring, the direction of the spring is in the same line as the force measured. Four, guide the standard: 1. Before using spring force dynamometer test, to look at it (that is, the maximum measuring range) range and degree value, it remains to be seen whether the pointer refers to the zero calibration, to check whether a pointer and spring shell gets stuck, make its can free expansion; The force on the spring meter is not allowed to exceed its range. The force of 2.1 N is approximately (D) To measure A force of about 6N, use the appropriate spring dynamometer (A). The static spring dynamometer is opposed to the direction of the two forces F1 and F2 of 4N, and the number of the spring meter is 4 N. Page 19 Case in question: A: the ball is of gravity and resistance, and the force is earth and air. Four, guide the standard: The correct understanding of g is 9.8 N/kg is C. The object that weighs 490N is probably (B) In a physical experiment group, the students of the physics laboratory were looking at the relationship between the gravity and mass of the object. The object under test Object mass m (kg) Gravity G (N) The ratio of G over m of N over kilograms. The average of G over m Object 1 0.1 0.99 9.9 9.8 Number 2 0.2 1.96 9.8 The object of 3 0.3 2.91 9.7 (1) in the course of the experiment, the measuring instrument springs the force meter to measure the gravity of the object. (2) the average value of G/m in the upper table. (3) the analysis of the experimental data in the table, the conclusion is that the object by the force of gravity is proportional to the quality, is a fixed value, the ratio is approximately equal to 9.8 N/kg. 20 pages Case in question: How