粒度换算表(国外英文资料).docVIP

粒度换算表(国外英文资料) Grinding particle size conversion chart Number of M mesh m mesh m mesh m mesh m mesh m mesh m mesh M 2800036700447505, 400063350728008236, 101700 121400141180161000, 18880208302470028,32500354254038042, 355453254830050270, 60250 65230702128018090, 160100150115125120, 120125115 160961709017586180, 8020075 230622406125058270, 53300483254540038, 50025 6002380018100013,55000, 2.68000, 1.610000, 1.3 The particle size can be measured in terms of its particle size, or the number of holes on the grinding screen as the unit of measurement. The number refers to the size or thickness of materials, the general is defined in the 1 inch *1 inch (inch) (inch) within the area of the number of mesh, the mesh number of mesh, material through the mesh that is defined as the number of mesh: 200 mesh, mesh is the material through 1inch*1inch there are 200 mesh. And so on, the larger the number of the mesh, material that the finer grain size, mesh size is smaller, the larger the size of that material. 1 mm (mm) =10-3 (m) =1000 microns (m) ------------------------------------------------------------------------------ Mesh refers to the particle size, the greater the number of the finer particles: granularity is particles can be obtained by screen mesh size, with 1 inches (25.4mm) the number of mesh width of the screen mesh representation, so called mesh. Mesh size table Mesh size um mesh size um mesh size um 53900140104160010 1020001708918008 1611902007420006.5 208402306125005.5 257102705330005 305903254435004.5 355004003840003.4 404204603050002.7 453505402660002.5 502976502170001.25 6025080019 8017890015 90160110013 100150130011 115125 120120 125115 130113 Eye for non standard units, easy to use, conversion formula of experience is: the size of D (mm) =16 / mesh. --------------------------------------------------------------------- The zinc sulfate solution and the proportion of Baume table The proportion of zinc sulphate solution