结构专业问题(国外英文资料).doc

结构专业问题(国外英文资料) List of frequently asked questions of structural specialty Serial number of common problems, relevant specifications, plans, institutions, comments Specification number entry A load and a calculation section 1 the influence of accidental eccentricity is not taken into account when calculating one-way seismic action. JGJ3-2002 3.3.3 rectification 2 for high buildings which are especially important or sensitive to wind load, the basic wind pressure is not used as the wind pressure value in the 100 year recurrence period. JGJ3-2002 3.2.2 rectification 3 high building fire evacuation staircase, load value is less than 3.5kn/m2. GB50009-2001 4.1.1 rectification 4 on roof live load still with the old standard value of 1.5 kn/m2, on non upper roof should be construction professional confirmation, sometimes structure according to non upper human roof design, construction for upper roof. GB50009-2001 4.3.1 rectification 5 of hotels, hospitals and other local toilet partition layout is dense, not converted into equivalent load according to the actual input, such as the wall weight per meter 1/3 reduced survival load value is too small, and more than 1 kn/m2. GB50009-2001 4.1.1 note 5 rectification 6 the ratio of the first natural vibration period Tt and the libration of the first natural vibration period T1 to the plane irregular structure and the main torsion of the structure is higher than 0.9, and the B height is greater than 0.85. JGJ3-2002 4.3.5 rectification 7 the structure of mass and stiffness distribution is obviously asymmetric and uneven, and it is still calculated by one-way horizontal seismic action. JGJ3-2002 3.3.2 rectification 8 for the V, Y, arc and well shaped flat buildings, the shape factor of wind load is still 1.3. JGJ3-2002 3.2.5 audit opinion 9, the stiffness coefficient of the beam in the cast-in-place floor is 1, which makes the support of the beam slightly smaller. JGJ3-2002 5.2.2 audit opinion 107-9 degrees, the frame structure has n