综合复习物理及考前模拟试卷(二)(国外英文资料).docVIP

综合复习物理及考前模拟试卷(二)(国外英文资料) Comprehensive review of physics and mock test papers (two) Key points and difficulties: 1. understand the propagation of light along a straight line and its application. 2. recognize the law of light reflection. 3. understand the features and causes of planar mirror imaging. The concept of virtual image 4. 5. recognize the melting and solidification of crystals. 6. understand the changes in the state of matter and its absorption and release. 7. quality concept and measurement. 8. the use of scales and the determination of density. Flexible application of the 9. density formula Knowledge point analysis The fourth chapter is in the world of light 1. linear propagation of light The maximum speed of propagation in vacuum is 3 * 108 M / sec 2. law of light reflection One point, two corners, three lines. The reflected light is in the same plane as the incident light and normal, and the reflected light is separated from the incident light on both sides of the normal. The reflection angle is equal to the incident angle Specular reflection: the reflection of light on a smooth surface is called specular reflection. Diffuse reflection: the reflection of light on a rough surface is called diffuse reflection. Like specular reflection, diffuse reflection follows the law of reflection of light. The law of 3. plane mirror imaging Features: the image is equal to the size of the object; The line of correspondence between the image and the object is perpendicular to the mirror surface; The distance between the image and the object is equal to the mirror surface; The image is opposite to the object; The virtual image is like. Image: not by the actual ray intersection form, but by reverse the actual light into the extension phase, so there is no light from the virtual image. Mirror: the parallel beam divergence. Concave mirror: to fuse parallel beams. The law of refraction of 4. light (1) when light is obliquely injected into the water from the air, the refracte