面临的技术问题(国外英文资料).docVIP

面临的技术问题(国外英文资料) Rapid prototyping technology and its technical problems faced with the development of product production /2007/11/09092735056.shtml 2007/11/9/09:27 Preface In the development of a new product, a simple example or prototype of the designed part or the whole system is always required before a large amount of money is invested, organized, processed or assembled. This is mainly because the production cost is expensive, and the mold production need to spend a lot of time to prepare, therefore, before the manufacture and sale of a complex product system, a working prototype can be evaluated, the product design modification and functional verification. The typical development process of a product is the previous generation prototype error is found, or found the design of more effective and better from further study, a prototype of the production is extremely time-consuming, mold ready to take a few months, so a complex parts by using the traditional method of processing is very difficult. Rapid prototyping (Rapid Prototyping) technology developed in recent years is directly based on the CAD model of rapid production prototype or part of group technology. It integrates CAD technology, numerical control technology, laser technology and materials technology and other modern scientific and technological achievements, is an important part of advanced manufacturing technology. Different from traditional manufacturing methods, rapid prototyping starts from the CAD geometry model of the parts, and uses software to separate the layers and numerically control the forming system, and uses laser beam or other methods to accumulate the material to form solid parts. Because it transforms complex 3D manufacturing into a series of two-dimensional manufacturing overlay. As a result, almost any complex parts can be generated without the use of moulds and tools, which greatly improves production efficiency and manufacturing flexibility. A more interesting concern is the speed