冲压模具(国外英语资料).docVIP

冲压模具(国外英文资料) [edit this paragraph] 1, brief introduction Stamping die - in cold stamping, the material (metal or non-metallic) processing parts (or semi-finished products) of a special process equipment, known as cold stamping die (commonly known as cold die). Stamping is a method of pressing a material at room temperature by applying pressure on the material on the mold of the press to produce a separation or plastic deformation so as to obtain the required parts. Stamping die is a necessary process equipment for stamping production, and it is a technology intensive product. The quality of stamping parts, production efficiency and production cost are directly related to die design and manufacture. The level of mold design and manufacturing technology is one of the important signs to measure the manufacturing level of a countrys products, and to a great extent, it determines the quality, efficiency and development ability of new products. [edit this paragraph] two, classification Stamping mold in many forms, the die is also based on the nature of the work, mold construction, mold materials three categories. Generally, the following main features can be classified: 1. classification according to process properties A. blanking die is made of a closed or open contour to separate the material from the mold. Such as blanking die, punching die, cutting die, cutting die, trimming die, cutting die, etc.. B. a die for bending or deforming a sheet blank or other billet along a straight line (bending curve) so as to obtain a workpiece with a definite angle and shape. C. drawing die is a mold made of sheet blank into open hollow parts or hollow parts to further change shape and size. D. forming die is to make the blank or semi-finished workpiece be copied and formed directly according to the shape of the convex and concave die, and the material itself produces only the partial plastic deformation of the mold. Such as bulging die, necking die, expanding die, fluctuation forming