dxp原理图常见错误.docVIP

原理图常见错误principle of common mistakesERC报告管脚没有接入信号ERC report no access to signal pins创建封装时给管脚定义了I/O属性creation package to the pin at the definition of I/O attribute创建元件或放置元件时修改了不一致的grid属性，管脚与线没有连上create components or modify components placed inconsistent grid attributes, and the lines do not pin connection; 3）创建元件时pin方向反向，必须非pin name端连线。create components reverse direction when the pin, non-name-pin connections. 元件跑到图纸界外：没有在元件库图表纸中心创建元件。 components went to the drawings profession : no paper charts component library center components.创建的工程文件网络表只能部分调入pcb：生成netlist时没有选择为global。the creation of the doc