- 3
- 0
- 约9.86千字
- 约 22页
- 2017-08-29 发布于辽宁
- 举报
金港市政工程路基施工质量控制本科论文
毕 业 设 计
题目: 太湖金港市政工程路基施工质量控制
Abstract:ith the rapid growth of national economy, the quickening of urbanization. For the traffic demand is increasingly, how to improve the quality of urban road construction, has become the top priority. As an important part of road structure and roadbed, it is not only the body of the road, it is the carrier of pavement and foundation, the quality of the subgrade directly determines the quality of the road. Strict control of roadbed construction, guarantee the quality of roadbed construction, to improve the quality of road construction plays an important role. A highway construction can achieve the desired purpose, subgrade construction mainly depends on the situation, and in the construction quality of subgrade construction is the core. In combination with the practical situation of the project, this thesis mainly discusses the subgrade construction quality as well as to the construction of the control. The project roadbed subgrade bed of (good) roughly divided into general and special subgrade (soft soil subgrade). Affecting the quality of general subgrade are: the overall stability, strength, water stability, drainage facilities and other factors. Soft foundation treatment are: sand cushion layer, filling replacement, riprap crowded silting method, method of reinforcing soil pile, sand compaction pile, back pressure to protect road, plastic drainage plate method.
Keywords: subgrade ;degree of compaction; particle size distribution ;soft ground treatment; sand filling method
目录
1.太湖金港工程概况 1
1.1路基种类 1
1.1.1一般路基 1
1.1.2特殊路基 1
1.2工程概况 1
1.3金港工程路基情况 2
2.路基施工质量要求 3
2.1路基整体稳定性 3
2.2路基强度 3
2.3路基水温稳定性 3
2.4路基排水施工 3
2.5上下边坡稳定美观 3
3.路基施工质量控制 4
3.1路基压实度的控制 4
3.1.1回填料的选择 4
3.1.2填料性质 5
3.1.3填料含水量 5
3.1.4填料粒径 5
3.1.5分层厚度 6
3.1.6压实方法 6
3.2机械作业 6
3.3涵洞及其他构筑物施工 6
4.软土地基质量控制方法 7
4.1砂垫层 7
4.2置换填土 7
4.3抛石挤淤法 7
4.4加固土桩法 7
4.5垫隔土工布法 8
4.6碎石桩 8
4.7挤密砂桩 8
4.8塑料排水板法 9
4.9反压护道法 9
5.路基压实质量的检验 10
5.1标准密度(最大干密度)和最佳含水量的确定方法 10
5.2压实度检验方法 11
5.2.1环刀法 11
5.2.2
您可能关注的文档
- 技工院校学生就业管理系统的设计与实现本科论文.doc
- 计划生育政策调整对人口数量、结构及其影响数学建模a题本科论文.doc
- 加氢脱硫技术本科论文.doc
- 加热炉本科论文.doc
- 家居装饰企业门户网站设计与实现本科论文.doc
- 家庭管理系统本科论文.doc
- 家用报警器驱动程序本科论文.doc
- 甲醇水精馏分离板式塔设计课程本科论文.doc
- 甲基丙烯酸二甲氨基乙酯的合成本科论文.doc
- 减速机本科论文.doc
- 小区绿化施工协议书.docx
- 墙面施工协议书.docx
- 1 古诗二首(课件)--2025-2026学年统编版语文二年级下册.pptx
- (2026春新版)部编版八年级道德与法治下册《3.1《公民基本权利》PPT课件.pptx
- (2026春新版)部编版八年级道德与法治下册《4.3《依法履行义务》PPT课件.pptx
- (2026春新版)部编版八年级道德与法治下册《6.2《按劳分配为主体、多种分配方式并存》PPT课件.pptx
- (2026春新版)部编版八年级道德与法治下册《6.1《公有制为主体、多种所有制经济共同发展》PPT课件.pptx
- 初三教学管理交流发言稿.docx
- 小学生课外阅读总结.docx
- 餐饮门店夜经济运营的社会责任报告(夜间贡献)撰写流程试题库及答案.doc
原创力文档

文档评论(0)