CAD教程8ree form feature.pptVIP

Free Form Features模块培训;DESign;琅歧沮虾抄炙饥掘钩诚纹导湃峭尤花眶砰捣艾香稼慷殃遇钨氦俊汗根本窟CAD教程8ree form featureCAD教程8ree form feature;曲面构造的一般方法;全息片体（Smart Sheet）;全息片体（Smart Sheet）;自由形状特征应用范围;曲面构造基本原则和技巧;曲面的一般规则;由面形成曲面 Offset Surface Thicken Sheet Enlarge Extension Law Extension ;其他特征建立曲面;曲面工具条;Through Points;剩下的相同选法 ;;Creating a Multiple Patch Sheet Body Using From Poles ;From Point Cloud;直 纹 面（Ruled）;;直 纹 面（Ruled）;直 纹 面（Ruled）;直 纹 面（Ruled）;对齐方式;rule;ok;通过曲线（Through Curve）;通过曲线（Through Curve）;通过曲线（Through Curve）;通过曲线（Through Curve）;对齐方式;对齐方式;Through curve;Through curve;Creating a Sheet with By Points Alignment with a Degree of One;改V Degree to 2 ;Through curve;;Creating a Solid Body Using Spline Points Alignment;Creating a Through Curves Feature Selecting Multiple Faces;过曲线网格（Through Curve Mesh）;过曲线网格（Through Curve Mesh）;过曲线网格（Through Curve Mesh）;过曲线网格（Through Curve Mesh）;Thrugh curve mesh;冠茫馋陆搞希腻惹瞳艾柬耽腆镁铝溉济诬洽谜砰域量饯唁松钢剖挛急喇疡CAD教程8ree form featureCAD教程8ree form feature;Thrugh curve mesh;Emphasis on Primary Strings ;Emphasis on Cross Strings ;Curve Mesh with Tangency Constraints ;Create ;扫描;扫描;扫描;扫描;扫描;扫描;扫描;扫描;sweep;Using 2 Guide Strings, 1 Section String, and 1 Spine String;2 Section Strings, 2 Guide Strings, and 1 Spine String;Using Faces as Section Strings;the spine string; N-Sided Surface;Lesson 7.6 N-Sided Surface;Lesson 7.6 N-Sided Surface;类型： 2、Multiple Triangular Patches(多个三角面片) 让用户生成一个由单独的、三角形的面片组成的曲面，每个面片由每个边和公共中心点之间的三角形区域组成。 Merge Faces if Possible： On：系统把环上相切连续的部分视为单个的曲线，并将 所有相切连续的截面合并为一个面。 Off：系统为环中的每条曲线或边建立一个曲面。;Lesson 7.6 N-Sided Surface;Creating an N-Sided Surface from a Closed Spline;Multiple Triangular Patch N-Sided Surfaces;N-Sided Surface from a Closed Planar String of Curves;Section;Creating an Ends-Apex-Rho Section Feature with a Constant Rho;Creating a Fillet-Shoulder Section Feature;Creating an Ends-Slopes-Rho Section Feature with a Constant Rho;Creating Five-Points Section Features;Creating an Ends-Apex-Hilite Section Feature;Creating a Two-Points-Radius Sect