12864液+7289模块显示温度和电压 程序.docVIP

附录：程序清单 主函数： #include reg52.h #include ISR.h #include general_purpose.h #include lcd12864.h #include DS18B20.h #include ADC0832.h void main() { Init_12864(); //人机界面初始化： Write_Cmd_12864( 0x80 ); Write_String_12864(实时监控); //中断初始化： Init_INTs(); while ( 1 ) { } } 中断服务程序： #include reg52.h #include general_purpose.h #include lcd12864.h #include DS18B20.h #include ADC0832.h #define TIMER0 50 unsigned int timer0_counter = TIMER0; #define TIMER1 50 中断函数库 //1. 中断初始化函数： void Init_INTs() { //定时器初始化： TMOD = 0x01; TF0 = 1； //中断使能： ET0 = 1; //开全局中断： EA = 1; } void INT0_isr() interrupt 0 { } void Timer0_isr() interrupt 1 { TR0 = 0; TH0 = ( 65536 - 10000 ) / 256; TL0 = ( 65536 - 10000 ) % 256; TR0 = 1; if ( !(--timer0_counter) ) { timer0_counter = TIMER0; Get_Temp_DS18B20(); Write_Cmd_12864( 0x88 ); Write_String_12864(当前温度:); Write_String_12864(temp_buffer); Get_Volt_ADC0832(); Write_Cmd_12864( 0x98 ); Write_String_12864(当前电压: ); Write_String_12864(volt_buffer); } } 通用函数库： #include reg52.h #include intrins.h //12MHz时，取1；24MHz时，取2 #define TIME_US 1 //12MHz时，取118；24MHz时，取247 #define TIME_MS 118 //1. us延时函数： void delay_us( unsigned int us ) // 1:21.5us; 2:33.5 40:490 { unsigned int i; for ( i = us * TIME_US ; i 0 ; i-- ) _nop_(); } //2. ms延时函数： void delay_ms( unsigned int ms ) { unsigned int i,j; for ( i = ms ; i 0 ; i-- ) for ( j = TIME_MS ; j 0 ; j-- ); } //3. 指数函数： unsigned int exp( int base , unsigned int power ) { unsigned int result = 1; while ( power-- ) { result *= base; } return result; } LCD12864函数库： #include intrins.h #include general_purpose.h #include lcd12864.h //全局变量: //LCD控制寄存器lcd_reg: //unsigned char lcd_reg = 0x00; //12864行选择： unsigned char code line_select_12864[4]={0x80,0x90,0x88,0x98}; //1. 向12864写指令： void Write_Cmd_12864( unsigned char cmd_12864 ) { Set_PSB_12864(); Clr_RS_12864(); Clr_RW_12864(); Clr_EN_12864(); _no