淬火介质对42CrMo力学性能的影响.PDFVIP

下半月出版 Material Heat Treatment 材料热处理技术 淬火介质对42CrMo 力学性能的影响 1,2 1,2 张彦敏 , 张晓军 ( 1. 河南科技大学 材料科学与工程学院, 河南 洛阳 471003; 2. 河南省有色金属材料科学加工技术重点实验室, 河南 洛阳 47 1003) 摘 要 采用热处理虚拟模拟仪 测定了N32 机油尧15% BW 淬火液和 15% F2000 淬火液的冷却特性曲线 研究了 15%BW尧15%F2000 淬火液和N32 机油对42CrMo 的显微组织和力学性能的影响遥 结果表明院42CrMo 使用 15%BW 淬 火后 能够得到理想马氏体 试样的硬度尧抗拉强度和屈服强度均高于使用 15%F2000 淬火液和N32 机油淬火的相应 值曰试样的伸长率低于使用N32 机油淬火的相应值遥 关键词 42CrMo 曰淬火介质曰机械性能曰显微组织 中图分类号 TG 154.4 文献标识码 A 文章编号 Effect of Quenching Medium on Mechanical Property of 42CrMo Steel ZHANG Yanmin1,2, ZHANG Xiaojun1,2 ( 1. School of Materials Science and Engineering , Henan University of Science and Technology , Luoyang 471003, China; 2. Henan Key Laboratory of Advanced Non-ferrous Metals, Luoyang 47 1003, China) Abstract 院The cooling curves of N32 machine oil, 15% BW and 15% F2000 were tested by heat treatment virtual simulation instrument. The effects of three quenching mediums (15% BW, 15% F2000 and N32 oil) on microstructure and mechanical property of 42CrMo steel were studied. The results show that the ideal martensite can be obtained after the sample was quenched in 15%BW. Hardness, tensile strength and yield strength of the sample are more better than those quenched in 15%F2000 or N32 oil. But the elongation is lower than quenched in N32 oil. Key words 院42CrMo; quenching medium; mechanical property; microstructure 着热处理生产技术的发展 人们更关注工件 胺类有机高分子聚合物 它作为淬火液可以缩短淬 的冷却技术(冷却方法 冷却介质) 遥