螺杆泵调试程序精要.docVIP

COMMISSIONING PROCEDURE FOR XXX PROJECT JOB NO. XXX COSIGN DISCIPLINE SIGNATURE DATE MACHINERY JOBCOST CENTER NO. XXX WBS ELEMENT: XXX PAGE X OF X X XX.XX.XX REV. DATE DESCRIPTION BY CH ‘K. REV’ W. EXAM. APPRO. CLIENT XXX CERTIFI. NO. COMMISSIONING PROCEDURE FOR SCREW PUMP DOCUMENT NO.. XXX CMT-XXXX-XX-XXXX （CMT-项目名称-专业-编号） CONTENTS PURPOSE 2. CODES AND STANDARDS 3. DOCUMENTS AND DRAWINGS 4. ENVIRONMENT AND SAFETY 5. RESOURCE REQUIREMENT 6. COMMISSIONING 7. AFTER TEST CHECK COMMISSIONING PROCEDURE FOR SCREW PUMP 螺杆泵调试程序 PURPOSE 目的 The following provides the commissioning procedures for the inspection, testing and commissioning of screw pump xx project, verify the equipment can also achieves its design intent and operability as specified in the technical contract after transportation and installation. 本调试程序包括淡螺杆泵的检查、测试以及调试，以确保该设备在经历运输和安装后，各项功能指标符合技术合同中的设计目的和操作要求。 CODES AND STANDARDS 依据的准则和标准 DOCUMENTS AND DRAWINGS 参考的文件与图纸 ENVIRONMENT AND SAFETY 环境和安全 Commissioning work should be prepared to prevent frostbite when the environment temperature is below 5℃. 当环境温度低于五度是要有防冻措施 Ensure the commissioning area is cleaning. 确保调试区域整洁 Ensure the place of caution brand is marked. 调试区域要悬挂警示牌 RESOURCE REQUIREMENT 调试资源 PERSONNEL ORGANIZATION 人员组织 Commissioning manager arrange the work. His job consists of putting up the commissioning inform, holding a commissioning warming-up meeting include of JSA. 调试经理负责安排，包括调试安排的通知，主持召开包括JSA在内的调试准备会议。 The main commissioning engineer (MCE) is mechanical engineer, the assistant commissioning engineers are electrical commissioning engineer, instrument commissioning engineer and piping engineer. 机械工程师作为主调工程师，辅调工程师包括电器工程师、仪表工程师和工艺工程师。 All participants must obey the order of MCE. 所有参加调试人员必须听从主调工程师指挥。 People partake in commissioning on site: commissioning engineers, Owner, Third party, inspector, Vendor service, QHSE. 参加调试的人员包括：调试工程师、业主、第三方、检验、厂家、QHS