ofdm通信系统仿真设计本科论文.docVIP

各专业完整优秀毕业论文设计图纸 摘 要 OFDM (正交频分复用)是将高速的数据流分解成许多低速率的子数据流，利用相互正交且重叠的多个子载波同时传输。它的主要优点是多径失真低，抗符号间干扰(ISI)能力强，频带利用率很高。 本文首先对OFDM的历史及其发展过程进行了介绍，之后对其基本原理和应用进行了讲解，而后依据OFDM通信系统工作原理，采用LabVIEW软件实现OFDM通信系统仿真，包括：串并转换、数字调制、IFFT、D/A、射频调制、仿真信道、解调、A/D、FFT、数字解调、并串转换等模块。最后，对设计的OFDM系统进行性能分析，包括误码率分析和峰均比分析等。 本论文主要由四部分构成:OFDM的国内外现状和优缺点，采用LabVIEW软件实现OFDM通信系统仿真，和对OFDM系统性能进行分析包括误码率分析和峰均比分析等。在OFDM的国内外现状部分，介绍了OFDM的提出、发展和应用还有它的优缺点。在OFDM的原理及应用部分，首先简单描述了一下OFDM系统的组成原理，然后详细讲述了OFDM的原理包括系统模型。第三、四部分是本文的重点，对OFDM系统的各阶段模块进行实现，之后在此基础上对其结果数据加以分析再对误码率和峰均比进行分析得出结论。 本文完成了对一个OFDM系统性能的仿真，同时为该系统的具体实现提供了有用的数据。 关键词:正交频分复用；OFDM；仿真；性能分析； Abstract OFDM (orthogonal frequency division multiplexing) is the high.speed data stream is divided into many low rate data stream, using a number of orthogonal and overlapped subcarriers transmitted simultaneously. Its main advantage is low multipath distortion, resistance to intersymbol interference (ISI) ability, high spectral efficiency. The performance for theOFDM system on the computer using the Labview simulation and analysis.The graduation design, I need to do is to master the working principle of OFDM communication system, realize the OFDM communication system simulation, using LabVIEW software, including: string and conversion, digital modulation, IFFT, D\/A, RF modulation, demodulation, channel simulation, A\/D, FFT, digital demodulation, and string conversion module. Performance analysis of OFDM system design, including the analysis of bit error rate and peak average ratio analysis. This thesis consists of four parts: including the history of OFDM and its development process, the principle and application of OFDM, implementation of OFDM communication system simulation, using LabVIEW software: string and conversion, digital modulation, IFFT, D\/A, RF modulation, demodulation, channel simulation, A\/D, FFT, digital demodulation, and string conversion module and analysis includes the analysis of bit error rate and the PAPR of OFDM system performance analysis. In the OFDMs hi