盐雾测试 英文版.docVIP

Salt spray testing SCOPE: this standard prescribles the conditions required in salt spray testing for specification purpose. It dose not prescribe the type of the specimen or sxposure periods to be used for a specific product, nor the interpretation to be given to the results. APPARATUS: 2.1 the apparatus required for salt spray testing consists of a fog chamber, a salt solution reservoir, a supply of suitably conditioned compressed air, one or more atomizing nozzles, specimen supports, provision for heating the chamber, and necessary means of control. The size and detailed the conditions obtained meet the requirements of this method. 2.2. drop of solution which accumulate on the celling or cover of the chamber shall not be permitted to fall on the specimens being tested. 2.3. drops of solution which fall from the specimens shall not be returned to the solution reservoir for respraying. 2.4. materials of construction shall be such that they shall not affect the correctiveness of the fog, nor be themselves corroded by the fog. TEST SPECIMENS: the type and number of test specimens to be used, as well as the criteria for the evaluation of the test results, shall be defined in the specifications covering the material or product being tested of shall be natually agreed upon by the purchaser and the supplier. PREPARATION OF TEST SPECIMENS 4.1. matallic and metallic-coated specimens shall be suitably cleared. The clearing method shall be optional depending on the nature of the surface and the contaminants, except that it shall not include the use of abrasives other than a parts of pure maggssium oxide nor of soivents which are cerretive or will deposit either corrosive or protective films. The ues of a nitric acid solution for the chemical cleaning, or passivation, of stainless steel specimens is permissible when agreed upon by the purchaser and the supplier. Care shall be taken that specimens are not recontaminated after caleaning by excessivs or careless han