英文期刊Automatic-door Design and Implementation Based on PLC.pdfVIP

Internet Publication Time: 2013-04-26 14:41 Internet Publication Address: /kcms/detail/41.1081.T1441.074.html Automatic-door Design and Implementation Based on PLC Quan Zhiyong （the Northern Electromechanical School，Zhangjiakou City,Hebei Province, 075000 ） Abstract: Automatic-door is a contorller unit to translate man’s accessing movement into comprehensible signal of door-opening,then open the door through the drive syestem,and close the door when man is leaving,so that we can control the door open and close system. Key word ：Automatic-door ；designment ；PLC Chinese library classification number: TM762 literature A article number: 1003-5168 (2013) 06-0085-01 Entering the 21st century, with the rapid development of Chinas economy, automatic door has been widely applied in the residents. Control unit determines the performance of the automatic door, nowadays, programmable controller (ProgrammablelogicController, PLC) become the most stable field of automatic door control unit. PLC technique has high reliability, strong anti-interference ability, fully functional, high applicability, system design, construction, small amount of work to maintain convenient, easy to transform, small volume, light weight, low power consumption advantages. 1 Automatic door control system design As shown in figure 1 is the automatic control of the overall design of the structure. Pulse signal is mainly produced by the photoelectric switch, signal input to PLC, through the. distribution of the PLC, and then amplified to control stepper motor to control load, so as to make the automatic door for normal work Signal Signal Power Stepper Load Impulse Assignment Multiplier Motor