SectionCoverPage[001]分析.docVIP

Section Cover Page Section 04200 1999-09-13 Masonry Units Use this Section to specify standard and hollow clay brick masonry, and concrete block masonry. This Section does not include concrete brick, stone, or glass block masonry. Contact Alberta Infrastructure, Specifications and Standards Branch if use of concrete brick or stone masonry is being considered. This Section does not address requirements, e.g. mortar, for renovation or restoration of existing masonry. This Master Specification Section contains: .1 This Cover Sheet .2 Data Sheet - Concrete Masonry, Mortar and Connectors .3 Specification Section Text: 1. General 1.1 Related Sections 1.2 Products Installed but not Supplied Under this Section 1.3 Reference Documents 1.4 Samples 1.5 Test Reports 1.6 Mock-Up 1.7 Testing and Inspection By Minister 1.8 Delivery, Storage and Handling 1.9 Coordination 2. Products 2.1 Clay Brick Masonry Units 2.2 Concrete Masonry Units 2.3 Horizontal Joint Reinforcement 2.4 Masonry Connectors 2.5 Fasteners for Masonry Connectors 2.6 Accessories 2.7 Mortar and Grout 2.8 Flashings (continued) 3. Execution 3.1 Examination 3.2 Cold Weather Requirements 3.3 Mixing Mortar 3.4 Placing of Masonry, Generally 3.5 Placing Clay Brick Masonry Units 3.6 Placing Concrete Masonry Units 3.7 Bonds and Patterns 3.8 Jointing 3.9 Installation of Reinforcement 3.10 Installation of Masonry Connectors 3.11 Installation of Flashing 3.12 Installation of Accessories 3.13 BuiltIn Work 3.14 Cutting and Fitting 3.15 Cleaning Applicable Standards: .1 ASTM?A653M96 Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot Dip Process .2 ASTM C14096b Sampling and Testing Concrete Masonry Units .3 ASTM C42696a Linear Drying Shrinkage of Concrete Masonry Units .4 CAN/CSA-A82.1M87(R1992) Burned Clay Brick (Solid Masonry Units Made from Clay or Shale) .5 CAN3A82.8M78(R1984) Hollow Clay Brick .6 CSA?A165 Series94 CSA Standards on Concrete Masonry Units .7 CSA A179