Aruba室内天线AP-ANT-40-ARUBAAP-ANT-40INDOOR详解.PDFVIP

DATA SHEET ARUBA AP-ANT-40 INDOOR 4X4 MIMO ANTENNA JW017A Dual-Band downtilt omnidirectional ceiling- mount antenna AP-ANT-40 is a dual band 4-element omni-directional antenna for use in Wi-Fi MIMO applications. Housed in a compact, low-profile and discrete plastic enclosure, the antenna can be mounted to a variety of ceilings. Each of the WEIGHT four MIMO antenna elements is connected to the Aruba • Approximately 410 g Access Point via a low-loss, plenum rated coaxial pigtail. HOUSING MATERIAL The radiation patterns are uniform and symmetrical, providing • Radome: PC/ABS UL94-V0 (white) high level signal density into defined coverage zones, and optimum coverage conditions for MIMO performance. OPERATING TEMPERATURE • -30° C to +70° C (-22° F to +158° F) FREQUENCY RANGE AND GAIN INSTALLATION HARDWARE • 2,400 – 2,500 MHz 4dBi • 4,900 – 6,000 MHz 5dBi The primary mounting method for drywall or tile flush mount uses the threaded post on the back of the antenna and POLARIZATION supplied mounting nut. The post protrudes though the tile or • Linear, vertical drywall material, and feeds the four RF cables. BEAMWIDTH Alternatively, the antenna can be attached directly to a solid • H-plane: omni-directional wall or ceiling surface using additional hardware supplied with the antenna. • E-plane: approximately 100 degrees (40 degree