I2C-busEEPROMDIPswitchforeasy详解.PDFVIP

NXP 5-bit multiplexed / 2 1-bit latched 6-bit I C-bus EEPROM PCA9559 2 I C-bus EEPROM DIP switch for easy system management A simple way to implement open-drain buffer, jumperless configurations. The device provides four sets of potential outputs — logic high, logic lows, outputs that reflect the part’s parallel inputs, or 2 outputs configured by the I C-bus. Key features The NXP PCA9559 is used to multiplex a default parallel input 2 4 Supports 5-bit, 2-to-1 multiplexing with an alternative set of inputs provided by the I C-bus or 4 One channel with flow-through inputs SMBus. It is a derivative of the popular NXP PCA8550 device, 2 4 One channel with inputs configurable via the I C-bus with the addition of open-drain outputs for driving different 4Supports one-bit, non-multiplexed latch for select pin voltage loads. It also adds two address pins to allow for up to control four PCA9559 devices per bus. 4 Open-drain outputs support voltages up to 3.6 V 4 Two address pins enable up to four devices per bus Typical applications for the PCA9559 include processor 4 Active-low override drives multiplexer outputs low frequency configuration, system clock generator frequency 4 Active-high write-pro