精品某厂区室外中压电缆敷设施工方案（中英文）.docVIP

TDI train - Infrastructure Electrical System Installation MV Cable Pulling Construction Plan TDI联合装置-基础设施电气系统安装 　中压电缆敷设施工方案 B 11/30/2009 ISSUED FOR COMMENTS A 11/26/2009 ISSUED FOR COMMENTS Rev DateDD/MM/YY STATUS PREPARED BY CHECKED BY APPROVED BY DOCUMENT REVISIONS 目 录 Content 一. 概况 Overview 3 1.1 工程概况 Project Overview 3 1.2 施工范围 Scope of Work 3 二．编制依据 Compilation Basis 4 三． 施工工艺流程：Construction Process 4 四. 前期准备 Preparation 4 4.1 技术准备 Technical Preparation 4 4.2 材料准备Material Preparation 5 4.3 主要机具准备 Main Equipment Preparation 5 4.4 作业环境准备 Work Environment Preparation 6 五. 敷设施工 Work of Cable Pulling 6 5.1 电缆敷设施工工序Work Procedure 6 5.2 机具布置 Layout of Tools 6 5.2.1 电缆的搬运及支架架设Cable Removal and Cable Tray 6 5.2.2 卷扬机与滑轮的布置 Winch and Pulley Arrangement 6 5.3 电缆展放Lay-off Cable 10 5.4 电缆敷设、固定Cable Laying and Fixing 12 六. 覆砂盖砖Spread Sand and Cover Bricks 12 七. 回填土Backfill Earth 13 八. 埋标桩Burying Stake 13 九. 挂标志牌Hanging signs 13 十. 质量控制Quality Control 13 10.1 主控项目Master Items 13 10.2 一般项目General Items 14 十一. 成品保护Finished Protection 14 十二. 质量记录Quality Record 14 12.1 质量保证资料Quality Assurance Information 14 12.2 施工记录Construction of Record 15 十三. 安全生产、文明施工要求和措施 Safety and Civilized Construction Requests and Measures 15 一. 概况 Overview 1.1 工程概况 Project Overview 项目名称： TDI联合装置Project name: TDI Train Plant Medium Voltage Cable Pulling Work. 本工程涉及三个变电站，分别是现有的220/35kV A472变电站、现有的35/10kV B301S变电站以及新建的35/10kV C581变电站，工作内容为三个变电站之间和从三个变电站接至MV用户的电力电缆、控制电缆、接地电缆的敷设。The project involves three substations, namely the existing 220/35kV A472 substation, the existing 35/10kV B301S the 35/10kV C581 substation and a new substation. This is the power, control and grounding cable pulling among three substations and for MV users connected to the three substations. 1.2 施工范围 Scope of Work 1) A472建筑（220/35kV变电站）出线回路：A472 Building(220/35kV substation) outlet circuit 由A472变电站引出3路35kV出线。其中： 一路引至B301S建筑（35/10kV变电站）原1#主变，原1#主变电缆将抽出，与新增4#主变连接；另两路引至35/10kV C581变电