功放电路的设计.doc

功放电路的设计 摘要 本文主要研究的内容是：功放电路的工作原理，及实际组装中的元器件的选用，以新增因了10小时计时电路，既有时序逻辑电路（计时器电路），又有组合逻辑电路（译码器电路）和数码显示电路；计时范围是0：00：00—9：59：59，共计10小时。 它由秒脉冲产生电路、计数器电路、译码器及显示电路。先由555振荡电路产生秒脉冲，然后提供给数字钟的秒计数器，计数满60秒后回零，并向分计时器输出一个进位信号；分计数器开始计数后，计数满60分后回零，同时向时计时器输出一个进位信号，时计数器按十进制进行计数，最后由译码器及显示电路显示计时结果。以便人们使用方便。本文以主要讨论了散热片的作用，及箱体制作的方法，实用性强。 【关键词】: 功放 整流 滤波 集成 功率 放大 散热 Circuital design of meritorious service readjust oneself to a certain extent Abstract The content the main body of a book is studied mainly is: And circuitaloperating principle of meritorious service readjust oneself to a certain extent, components in actual assembling selects and uses, circuit reckoning by time 10 hours in order to having increased a reason newly, now that the order logic circuit (calculagraph circuit), there be combination logic circuit (decoder circuit) and numerical code to demonstrate a circuit sometimes; The rangereckoning by time is 0：00：00 9：59：59, totals 10 hour. It produces circuit , counter circuit , decoder and demonstrates a circuit from second of pulse. The oscillating circuit produces second of pulse first from 555 ,provide second of counter giving a digital clock and then, the full 60 secondsqueen of counting returns to zero , exports a carry signal toward mark of calculagraph and; The full 60 mark queen of counting returns to zero , exports a carry signal toward time calculagraph at the same time after mark of counter starts counting,the counter carries out counting now and then according to decimal system, the final circuit from decoder to display demonstrates the result reckoning by time. For the purpose of people is put into use go to the lavatory. Effect the main body of a book is sliced in order to having discussed heat dissipation mainly, the method , pragmatism that box system assumes are strong and. 【Keyword meritorious】: service readjust oneself to a certain extent commutation wave filtering integration power amplifica