物性测定仪的设计及装配仿真.doc

河南科技学院 2009届本科毕业设计 设计题目：物性测定仪的设计及装配仿真 摘 要 Unigraphics（简称UG）是现代计算机辅助设计中应用最广泛的先进三维软件，其功能十分强大。本文介绍了基于UG下的物性测定仪的各零件的三维建模，详细地说明了在UG的装配模块下对物性测定仪的各个零件如齿轮、蜗轮、蜗杆、轴、底座和箱体的虚拟装配并进行运动仿真，根据装配效果对设计的物性测定仪的各个零件间的关系进行检测，观察是否存在干涉现象，最后通过生成的物性测定仪的运动模拟，进一步观察设计的物性测定仪是否合理，从而提高了物性测定仪的设计准确性和效率。 关键字: UG;三维模型;虚拟装配；运动仿真  Texture Analyzers design and assembly simulation based on UG Abstract Unigraphics（it is called UG for short）is the most widespread advanced three dimensional software in the modern computer-aided design applies，its function is very formidable. In this article, it is introduced the Texture Analyzer various components three dimensional based on the UG, under the UG assembly module, it is explained the Texture Analyzer each components like gear, the worm gear, the worm bearing adjuster, the axis, the foundation and the box bodys hypothesized assembly and carries on the movement simulation, carries on the examination according to the assembly effect to between the design Texture Analyzer s relations each components, observe whether to have the interference, finally through the production Texture Analyzer s movement simulation, further observes the design of the Texture Analyzer to be whether reasonable, thus enhanced the Texture Analyzer s design