DMAPCB板布线指南.pdf

  1. 1、本文档共12页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
DMAPCB板布线指南

DM9000A/ 9010 Layout Guide DM9000A / 9010 Layout Guide Technical Reference Manual By: DAVICOM Charles Tsai Davicom Semiconductor, Inc Version: DM9000A/9010-LG-V10 1 AUG 19, 2004 DM9000A/ 9010 Layout Guide 1. Placement, Signal and Trace Routing • Place the 10/100M magnetic as close as possible to the DM9000A / 9010 (no more than 20mm) and to the RJ-45 connector. • Place the termination resistors 50 as close as possible to the 10/100M magnetic and the DM9000A / 9010 RXpins and TXpins. The 50 resistors and grounding capacitors of TX and RX should be placed near DM9161 (no more than 10mm). • The 25MHz crystal should not be placed near important signal traces, such as RX receive pair and TX transmit pair, band gap resistor, magnetic and board edge. • Traces routed from the DM9000A / 9010 RX pair to the 10/100M magnetic and the RJ45 connector should run symmetrically, directly, identically, and closely (no more than 2mm). The same rule is applied to traces routed from the DM9000A / 9010 TX pair. Do not turn at right angle (90 ), turn 45 instead Crystal

文档评论(0)

docman126 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:7042123103000003

1亿VIP精品文档

相关文档