2011年二级建造师考试《机电工程》练习题(国外英文资料).docVIP

2011年二级建造师考试《机电工程》练习题(国外英文资料) In 2011, the secondary builders test electromechanical engineering Scene: the electrical equipment installation project of A power plant on June 6, 2008. The equipment includes a device and secondary equipment, mainly energy conversion equipment, switching equipment and lightning protection equipment. Project to be finished at June 30, 2008, after the commissioning, equipment are not safe quality problem, but in July 30, 2008, a switch blowout accident happened in the plant, after investigation, the reason is that the circuit breaker to cut off the electric current through a circuit, the switch between the contact arc, arc have not been put out in a timely manner, the combustion time is too long, causes high inner pressure switch and burst accidents. According to the scene, answer the following questions: The following are equipment (). dynamo transformer Circuit breaker transformer Electric relay Answer: the ABCD According to function and structure, switch equipment can be divided into (). Circuit breaker relays C. Fuse Load switch Disconnecting switch Answer: ACDE The main measures to extinguish the arc include (). A. adopt an insulating medium to blow arcs, elongate the arc, increase the cooling surface and increase the heat transfer rate Improve the speed of break between the contacts C. place the contact in a vacuum D. to reduce the arc temperature by cooling the insulating medium, reducing the thermal emission and thermal dissociation to extinguish the arc E. Reduces the pressure of the insulating medium, reducing the density of the gas and causing the arc to go out Answer: the ABCD The following belong to the lightning protection equipment (). A. Lightning conductor C. arrester D. Circuit breaker Answer: ABC Scene: an electromechanical company contracts the mechanical transmission system installation of a pharmaceutical company. Equipment includes: chain drive, shaft, key, coupling and clutch. After installation, the mechanical