GB其它(国外英文资料).docVIP

GB其它(国外英文资料) GB/t1.1-2000 standard work guide part 1: standard structure and writing rules GB/t1.2-2002 standardization work guide section 2: the method for determining the content of normative technical elements in the standard GB/t324-1988 weld symbol notation GB/t985-1988 the basic form and ruler of welding weld, manual arc welding and gas shielded weld weld. GB/t986-1988 the basic form and size of submerged arc weld groove GB/t1031-1995 surface roughness parameters and their values GB/T1047-2005 the definition and selection of the pipe element DN (nominal size) GB/t1048-2005 the definition and selection of the pipe element DN GB/t1800.1-1997 limit and matching foundation 1: vocabulary GB/t1800.2-1998 the limit and co-operating base 2: the basis for tolerance, deviation and cooperation. GB/t1800.3-1998 limit and matching foundation part 3: standard tolerance and basic deviation values. GB/t1800.4-1999 the limit of tolerance and the tolerance of holes and axes. GB/t1801-1999 options for tolerance and coordination GB/t1803-2003 the limit and fit size to 18mm hole, shaft tolerance zone GB/t1804-2000 the tolerance of linear and angular dimensions of unknown tolerance GB/T1957-2006 smooth limit gauge technical conditions GB/T1958-2004 product geometry specification (GPS) shape and location tolerance test GB/t3100-1993 international unit system and its application GB/T3101-1993 general principles of quantity, unit and symbol GB3102. 1 ~ 3102.13-1993 quantity and unit GB/t3505-2000 the technical specification of the surface structure of the surface structure of the product geometry specification GB/t4457.2-2003 - the basic rules of the drawing of the drawing of the drawing of the technical drawing and the baseline. GB/T4457.4-2002 drawings of mechanical drawing GB/T4458.1-2002 drawing of mechanical drawings GB/t4458.2-2003 mechanical drawing assembly diagram of parts and their arrangement methods GB/T4458.4-2003 mechanical cartographic size injection GB/T4458.5-2003 m