2003年度安装专业模拟试卷(国外英文资料).docVIP

2003年度安装专业模拟试卷(国外英文资料) 2003 installation professional simulation test paper One, one, one, one, one, one. 1, the material that requires the corrosion of hydrofluoric acid is ___. A, porcelain plate B, ceramic plate C, bright green rock plate D, opaque graphite plate 1 choice answer: ABCD The material for acid resistance and heat conduction is ___. A, porcelain plate B, ceramic plate C, bright green rock plate D, opaque graphite plate number two choice answer: ABCD The quota for equipment degreasing is ___. A, equipment within the total area of B, skim net area C, according to inside diameter calculation skim net area D, according to outer diameter calculation skimmed net area Choose the answer: 3 ABCD The calculation of the amount of filling in the tower is ___. A, solid fill the net weight (t) and the actual wastage B, fill in net weight (t) C, D filling volume (cubic meters) plus the actual net loss, fill in the net volume (cubic meters) the answer choice number 4: ABCD The effective ventilation area should not be less than ___ in the gate of the inducer outlet and the shutter window. A, 90% B, 85% C, 80% D, 70% choice answer: ABCD In the construction of furnace kiln, the measurement unit of square meters is used as the measuring unit. A, packing project B, grouting engineering C, foreshadowing asbestos plate engineering D, and hanging stick high temperature insulation board project 6 choice answer: ABCD It is not allowed to install the equipment in place until the concrete base reaches the design strength of ___ %. A, 50 B, 60 C, 70 D, 807: ABCD The pressure value of the high-pressure boiler is ___MPa. A, 3.82 B, 13.73 C, 9.8 D, 16.7 choose the answer: ABCD The valves in the corrosive medium are used for _____. A, regulator B, ball valve C, diaphragm valve D, gate number 9 choose the answer: ABCD The medium and low pressure lines are not strictly required, and the flange is ___. A, integral B, loose set C, threaded D, and other type 10 choices: ABCD According to