使用BCDEdit修改Win7的系统启动菜单(国外英文资料).docVIP

使用BCDEdit修改Win7的系统启动菜单(国外英文资料) A command line tool in Windows Vista to establish and reconfigure bootloader, which does not need to use the boot.ini file. Use BCDEdit to modify the Windows Vista system boot menu In the previous NT based Windows system, Windows used Ntldr as the Boot Loader to Boot the system, - the so-called boot loader, in refers to the kernel operation performed before a small program, system through it to initialize the hardware devices, such as memory space mapping is created, the system hardware and software environment set to a suitable condition, for the final calls to the operating system kernel ready right environment. - in the process of start, Ntldr using Boot. Ini file to determine the start/Boot options to show which operating system in the process, our set of startup options can be modified through the Boot. Ini file content implementation accordingly. In Windows Vista, Microsoft introduced a new boot loader architecture, Windows boot Manager (bootmgr.exe). And Ntldr is heavily dependent on different hardware, Windows Vista, the new architecture can achieve complete hardware independence, and able to seamlessly combine with a variety of operating system, make Windows Vista start/boot process more fast and safe. At the same time, will be before the Windows in the system by the Boot. Ini management is handed over to the content of the new Boot Configuration Data (BCD: start the setup Data), of course, also provides a new Boot option editing tool, BCDEdit (BCDEdit. Exe), to manage the startup Settings. BCDEdit: Windows Vista startup Settings editing tool In the traditional computer, based on the BIOS if only install Windows Vista, in addition to very early test version of the Windows Vista, you will find that the Boot. Ini file has completely disappeared from the system; If the system is installed in the Windows Vista and Windows before such as Windows XP, though still can find the Boot. Ini files, however, only applies to those systems,