印刷纸张知识(国外英文资料).docVIP

印刷纸张知识(国外英文资料) Vary in length and width: A4 size: 21 * 29.7 cm B4 specification: 25 * 35.4, B5 specification: 18.2 * 25.7 The size of a piece of paper is made of paper and then trimmed to a certain size. In the past, the size of the paper was represented by how much open (e.g., 8, 16, etc.), and now I adopt the international standard, which is A0, A1, A2, B1, B2... Such markers represent the size of the paper. The ratio of the width of the paper to the width of the paper (in terms of X) and length (in terms of Y) is X: Y = 1: n. According to the basic area of the paper, the size is divided into A series, B series and C series, which is 841mm by 1189mm, and the width is 1 square meter. The size of B0 is 1000mm by 1414mm, and the area is 2.5 square meters. The size of C0 is 917mm by 1279mm, with a width of 2.25 square meters. The size of the paper is only used in series A and B. If the A0 paper is divided into two equal parts in length, it becomes the A1 specification, and the A1 piece of paper is split along the length, so it becomes the A2 specification, which is the same as the A8 specification. B8 paper is also opened to B8 specification. The size of A0 ~ A8 and B0 ~ B8 are shown in the table below. There are seven sizes for photocopier paper, including A3, A4, A5, A6 and B4, B5, B6, etc. For example, A4 paper, which is A paper folding A basic size of A, is folded four times, so the area of A piece of A4 paper is one of two to the fourth power of the basic paper area, which is 1/16. The rest depends on this kind of push. Printing paper is the paper that USES photocopier paper, the classification of photocopier paper is divided by size, there are several criteria: 1, type A; 2, B; The type K, the type K paper is the type of paper that we often say, the type of paper that is useful only at home. Now we usually use type A paper. Whether A type B type, its classification, such as the A5 is twice the A6, A4 is twice as large as the A5, twice that of A3, A4, B4 is twice