挖掘机操作说明(国外英文资料).docVIP

挖掘机操作说明(国外英文资料) 1, the operation technology The first step is to identify the surrounding area. When turning work, be aware of the surrounding obstacles, terrain, and safety. When working, be sure to avoid tipping or hitting. Try not to turn the final drive in the direction of the digging, or you can easily damage the walking motor or hose. When working, make sure that the left and right track are fully exposed to the ground and improve the dynamic stability of the whole machine. Effective mining methods The maximum excavation is when the bucket and rod, the bucket and the bucket are 90 degrees. When the bucket tooth and the ground are kept at 30 degrees, the best of the excavations is the least resistance to the soil. When excavating with a bucket bar, the Angle of the bucket is guaranteed to be between 45 degrees and 30 degrees from the front. The use of both arm and shovel can improve the efficiency of mining. 3, mining rock The use of a dipper to excavate the rock will cause greater damage to the machine and should be avoided. When excavating, the position of the body should be adjusted according to the crack direction of the rock, so that the shovel can shovel in and excavate. To insert a dipper into a rock fracture and dig with a bucket and a dipper. Unbroken rock should be broken and then excavated. Slope leveling work For planar shaping machine should be flat on the ground, to prevent the body shaking, to grasp the movable arm and arm movement coordination, control the speed is vital for plane dressing. 5, loading operation The body should be in a horizontal and stable position, otherwise it is difficult to control the rotating uninstall and extend the cycle time. The body and truck should be kept at a proper distance, preventing the airframe from touching the truck when it is turning 180 degrees. As far as possible, go to the left turn outfit, the view is open, the work efficiency is high, at the same time must grasp the rotation Angle correctly, in order