普通混凝土的性质(国外英文资料).doc

普通混凝土的性质(国外英文资料) Technical properties of ordinary concrete (middle passage) China concrete network [2006-1-18] network hard disk I want to build station blog commonly search The performance of hardened concrete (1) the strength of the concrete Strength is the most important properties of hardened concrete, and the other properties of concrete and strength all have close relations, the strength of the concrete mixture ratio design, construction control and main technical indexes for evaluation of the quality inspection. The strength of concrete is mainly compressive strength, tensile strength, tensile strength and shear strength. The strength of compressive strength is the largest and the main strength index. The strength and strength of the concrete cube. According to our country normal concrete mechanical performance test method (gbj881-85), the standard size of the cube specimen is 150mm by 150mm by 150mm. Standard curing conditions for 20 + / - 3 ℃ temperature, relative humidity above 90%; The standard age is 28 days. The strength of the compressive strength measured under these conditions is called the concrete cube compressive strength. The test and calculation methods are detailed in the test section. According to specification for design of concrete structures (GB50010-2002), the strength grade of concrete is determined according to the cube compressive strength standard values, and the concrete cube compressive strength standard value refers to the standard method to make maintenance of side length is 150 mm cube specimens, 28 days in age with standard method of compressive strength with 95% reliability. The concrete structures are divided into C15, C20, C25, C30, C35, C40, C45, C45, C55, C55, C65, C75, C75, C75, C75, C80, C75, C75, C80, C75, C75, C80, C75, C75, C80, C75, C75, C80, C75, C75, C80, C75, C75, C80, C75, C75, C80 According to the concrete quality control standards (GB50164-1992) regulation, strength grade is expressed symbols C and the correspond