有机废气(国外英文资料).doc

有机废气(国外英文资料)Organic waste gases (VOCs) processing technology review sources: Inner Mongolia environmental science update time: 09-8-21 shouldest be author: Ma Shengbai Wang Bin With the development of economy in recent years, a large number of new chemical enterprises, combined with environmental protection investment is not enough, lead to a large amount of industrial organic waste gas emission, the atmospheric environment quality to drop, to serious harm to human body health, caused huge losses to the national economy, therefore, need to increase the processing of organic waste gases. For the management of organic waste gas, people have to study, and have developed some of the most effective control technology, such as widely used and studied more thermal damage method, condensation method, absorption method, etc, in recent years, formation of the new control technology with biological membrane method, corona method, plasma decomposition method, etc. This article introduces the above methods in more detail. 1 1. Organic waste gas treatment technology method of thermal damage Thermal destruction is the more widely used and research more organic waste gas treatment method, especially for low concentration organic waste gas, thermal destruction of organic compounds can be divided into direct flame combustion and catalytic combustion. Direct flame combustion is a method of directly burning and assisting fuel combustion in the air flow. In most cases, the organic concentration is low enough to burn without supplemental fuel. Direct flame combustion can achieve 99% heat treatment efficiency under proper temperature and retention time. Catalytic combustion is organic matter is heated in the air, in the role of catalytic bed, accelerate organic chemical reactions (or destroy the efficiency of the method), the presence of catalyst in organic matter thermal damage than direct combustion method requires less retention time and lower temperature. Catalysts play an important r