机电体化谜底(国外英文资料).docVIP

机电体化答案(国外英文资料) The core technology of electromechanical integration research is the interface problem. 5. Electromechanical integration system (product) most (or subsystems) is composed of five: mechanical systems, electronic information processing system, power system, sensing detection system, components of system. The mechanical and electrical interface is the mechanical interface, physical interface, information interface and environmental interface. The mechanical and electrical integration system (product) is divided into design type: open design, adaptive design, variability design. Mechanical and electrical integration system (product) is divided into mechanical and electrical integration: mechanical and electrical complementarity, electromechanical combination (fusion) method, mechanical and electrical group legal. 9. Mechanical and electrical integration technology is a master in mechanical, power, information and control functions on the basis of introducing the microelectronics technology, and mechanical device and electronic device with the related software of organically combining the floorboard of the system. 10. Electromechanical integration system implementation should have three functions of two important features (conversion) : mainly on energy conversion and information conversion. 11. Screw nut institutions are: the basic transmission form nut fixed screw rotate and move, screw nut rotation screw nut mobile, mobile, fixed screw nut rotate and move four forms. The cross section of the ball screw is divided into single circular arc and double circular arc. The circulation of ball ball is divided into inner and outer loops. 13. Ball screw pair of axial clearance adjustment and the basic method of preloaded are: double nut thread preload adjustment and double nut tooth difference preload adjustment, adjust the preloaded double nuts washers and springs automatically adjust preload four ways. The way the ball screw is used is to have a single push --