模型制作基础教程(国外英文资料).docVIP

模型制作基础教程(国外英文资料) The preparation of the first chapter As a new model enthusiast, the first question is: what tools do you need to make a model? What is the best way to save money? Id like to talk about my experience here. I hope I can help you. Model shears/pliers Blade is made from high strength metal and into bevel (also called a diagonal cutting pliers), is the model tool parts removed from the board, because is oblique mouth, so will not damage parts. The price is about 18 yuan for a homemade audi. 2. The pen knife After parts cut, will cut parts on the excess flow path, you use a knife, suggest to buy from 28 yuan/the (8 slice blade) here want to remind a beginner with a knife is very sharp, use pen knife blade dont towards themselves, so as not to cause harm. 3. The file After the parts are removed, you will need to polish the work, and you will need it. A file can be divided into a diamond powder file (ostensibly with a cheap diamond powder) and a thread file. The latter can hone the etching. It is suggested that you buy a suit with various shapes. The average price is about 20 to 50 yuan. The cleaning of a file can be done with a scrap of old teeth. 4. Sand paper After the roughing of the file, the paper will be processed with sandpaper, and the paper will be divided into various Numbers, the larger the number, the more detailed, the proposal is to buy 800,1000. 1200 water sandpaper (sold at the hardware store at $0.6/1) 5. The glue Parts grinding is completed, then use a special model of adhesive glue, here the author is strongly recommended to buy tamiya slip joint glue (25 yuan/bottle) it is quite good liquidity, and the bonding strength is moderate, the most important thing is that it has the role of infiltration, thus avoiding the damage of overflow parts due to too much glue. Other types of glue include the kings bottle (a bottle of $10 / bottle) and the $8 bottle ($8 / bottle), etc. 6. Tweezers Youll need a handy pair of tweezers when youre making a l