液位控制器0.00(国外英文资料).docVIP

液位控制器0.00(国外英文资料) Liquid level controller Way to work Electronic liquid level switch control (BZ2401 or BZ0501) and the matching water level controller (BZ201, BZ202) to control the control of the liquid level. The principle of electronic liquid level switch is to detect the liquid level through the electronic probe, and the special chip is tested by the liquid level test To the signal processing, when measured liquid reaches the action point, chip output high or low level signal, combined with water level controller, so as to realize control of the liquid level. Without floating ball and dry reed pipe, external mechanical action, dirt resistant and durable, is not afraid of floater, arbitrary Angle installation, vertical installation has certain anti wave function, suitable for long time immersed in the water, working voltage is 24 v dc 5 -, very safe. This kind of method is more practical, long life, safety and price. Float switch control One is with a large metal ball float switch, immersed in liquid buoyancy is big, can control the two level, such as liquid is full, the floating ball rise due to buoyancy, drive the ball movement, the valve closed, stop the water, when there is less water, floating ball fell, the valve opens, again into the water and so on. This method is more applied to the boiler. The other is a dry reed pipe micro float switch, from the outside with a small magnetic floating ball closes the rod inside of dry reed pipe, so as to control the liquid level, most of the application in water level control, generally a few dollars can have the deal, but vulnerable to dirt Impact. And theres a cable type float switch, the device through an elastic wires connected to the water pump, can be used in water tower, pool all kinds of float switch water level automatic control and water protection, allow use electrical appliances is 220 v, about 10 a, a fastening point of the balance weight or elastic wire to wire length between buoy, decision level of high