电动机算法口决(国外英文资料).docVIP

电动机算法口决(国外英文资料) The capacity of the transformer is known, and the rated current of each voltage rating is applied Formula a: The capacity divided by the voltage is multiplied by six divided by ten. Description: applicable to any voltage level. In daily work, some electricians involve only one or two voltage-rated transformers. By simplifying the above rules, we can derive the formula for calculating the rated current of each voltage level. The capacity factor is multiplied. The capacity of the transformer is known as the current value of the first and second protection of the fuse block (commonly known as fuse). Formula b: The voltage of the transformer is matched by the voltage of the transformer. Its going to be a low pressure fuse, and its going to be 9 divided by 5. Description: The proper use of the fuse is very important to the safe operation of the transformer. The correct selection of melt is more important when it is only used for transformer high and low voltage side protection. This is a problem that electricians often encounter and solve. Three phase motor capacity is known, and the rated current is rated The formula (c) : the capacity divided by the kilovolt, the quotient point is seven six. Description: (1) the formula is applicable to any voltage grade three-phase motor rated current. By the formula and the formula can explain different capacity of the same voltage grade of the rated current of the motor is not the same, namely the kv voltage number, remove in the same capacity, the quotient is obviously not the same, is not the same quotient to take the same coefficient of 0.76, the current value is not the same. If the above formula is called the general formula, it can be deduced to calculate 220, 380, 660, 3.6 kV voltage and the rated current of the motor is special calculation formula, with a special calculation formula to calculate the rated current of a three-phase motor, kw direct relations with current ampere capacity multiples, eliminating t