电子狗说明(国外英文资料).docVIP

电子狗说明(国外英文资料) At / / /a780e249000000000000002738d705597df2# nolink Common problems and solutions Noil basic function (1) function description The host starts the display instructions Start the startup The screen test will be displayed first when switched on, and all the subtitles will be bright, including the electronic compass/radar frequency/distance speed display. 1-2 will broadcast the greeting [welcome to use the conqueror global satellite radar system, please fasten your seat belt] The 1-3 coordinate version shows the current GPS version XXXX. 1-4 local time shows, at present time XX: XX The 1-5 driving mode shows that the preset value is [the safe driving speed limit pattern] 1-6 radar signal detection Settings, currently radar signal Settings [high], preset values are high Satellite launch status When the satellite connection is successful, it will be broadcast first. 2-2 when the machine is in a state of satellite links, the time of the : will continue to flashing, whereas when not connected to the satellite, in time: will not last, in the state, can not connect with satellite electronic compass north, south, east and west will continue to take turns flashing, when connected to the satellites, electronic compass will display according to the direction of car travel and azimuth. 2-3 display in the C and U (see chart 2) represents the current users driving mode, when according to C, on behalf of the speed limit for the camera system model, when the shows at the same time as U C, on behalf of the current system model for photography, when only show U, representative for safe driving mode at present, when C with U dont show, on behalf of the current model for safe driving the speed limit. Host function query System information query and download mode The function project queries need to be pressed [MODE] for a second before entering the system information loop query, which can be repeated for a second 1-1 fabric altitude query, this project should be in the mac