确定模具类型的主要结构(国外英文资料).docVIP

确定模具类型的主要结构(国外英文资料) Determine the main structure of mold type Commitments molding plastic parts commitments to a, often put forward by product designers, its content is as follows: (1) after ShenQian is regulation of fabrication drawings, and indicate the brand of the plastic, transparency, etc. The specification of plastic parts or technical requirements. Production of production. A sample of plastic parts. Usually the design plan descriptions of the mold by plastic parts engineer put forward according to the specification of molding plastic parts, mold designers to molding plastic parts specification, mold design specification as the basis to design the mold. Second, the collection, analysis, digest the raw data Collect the relevant design, molding process, molding equipment, machinery parts processing and special processing data, used for mould design. The paper analyzes the plastic parts, understands the purpose of the making parts, analyzes the technology of the plastic parts, and the precision of the dimensions. Such as plastic parts in appearance shape, color, transparency, what is the use of performance requirements, structure geometry, slope, insert, and so on and so forth is reasonable, welding scar, degree of molding defects such as shrinkage cavity allows, with or without coating, electroplating, after cementing, drilling and other processing. Choose plastic parts dimensional accuracy were analyzed, and the size of the highest see if estimated molding tolerance below the tolerance of plastic parts, can produce accordance with the requirements of the plastic parts. In addition, we also need to understand the plastic molding and forming process parameters. [2] digestion process information, analyze the process specification proposed molding method, equipment, mould structure type, material specifications for proper, can implement. The molding materials should meet the requirement of the plastic parts, and have good liquidity, uniformity and isotropic and