附着式升降脚手架(国外英文资料).docVIP

附着式升降脚手架(国外英文资料) Attached lift The attached scaffold equipment is a new kind of scaffold technology which was developed rapidly in the early 2000s, which has important influence on the progress of construction technology in China. It will high operation into a lower operation, will be suspended operation into a frame body internal operation, significant low carbon, high-tech content and more economical, more secure, more convenient, etc. Low carbon Reduce steel consumption by 70% Saves 95% of electricity Save 30% of construction consumables economy The construction body of more than 45 meters is applicable. The more expensive the floor, the more obvious the cost of saving 30% to 60% for each building. practical The building body can be applied to various structures security Using automatic synchronization control system and remote control system, and can prevent unsafe condition actively, and USES the multiple set of star wheel fall prevention device to prevent failure reset device failure, etc, to ensure the safety of the protective frame body always, effective prevention. intelligent Using the microcomputer load technology control system, it can display the hoisting condition in real time and automatically collect the load value of each hoist. When the load of a certain position exceeds 15% of the design value, alarm the alarm and display the alarm position in the light form. When more than 30 percent of the equipment will be automatically shut down until the problem is ruled out. Effective avoidance of overload or loss of overload. mechanization Implement low build high use function. One-time assembled at the bottom of the building main body, attached to the building, along with the increase of floor height, the whole operation process does not occupy other hoisting machinery, greatly improve the efficiency of construction, and the environment more human, management maintenance easier, civilized operation effect is more outstanding. aesthetic Break through the tr