防腐方法(国外英文资料).docVIP

防腐方法(国外英文资料) The above factors will affect the corrosion current, among them, the soil resistivity is main indexes of the soil corrosivity, the smaller the soil resistivity, form a corrosion cell current intensity, the greater the corrosion rate were higher, and vice versa. It is commonly used at the same time for the protection of corrosion and protection against corrosion and electrical protection. Insulation layer according to corrosion of pipeline in regional topography, geomorphology, geology correct selection and reasonable anti-corrosion materials, commonly used at home and abroad have oil, epoxy coal tar, coal tar enamel, polyethylene fusion bonded epoxy powder, etc. Total cost of the pipeline corrosion protection shall include the following several factors (1) material, (2) construction, (3) repair, (4), (5) the cathode protection installation, 6, 7) test, design of maintenance, etc., integrated all factors mentioned above, the current domestic use is more epoxy coal tar anti-corrosion, can undertake choosing according to different requirements. The specific protective measures for piping corrosion have the following methods Protective coating Corrosion resistant coating is widely used for the corrosion control of buried pipelines. Coating as the first line of defence of corrosion control, its role is to the tube base metal from the corrosive environment of soil, at the same time provide the necessary for the implementation of the additional cathodic protection insulation condition. In addition, the pipeline coating will inevitably be defective in coating, operation and unloading, underloading and running. Corrosion protective coating Corrosion resistant coatings for new buried pipelines are mainly composed of composite coatings and epoxy powder. Coal tar enamel and petroleum asphalt are currently used very little in the pollution environment, and the old pipe repair is mainly a belt and liquid coating. Composite coating Through simple physical folding or