零序电流互感器任务道理(国外英文资料).docVIP

零序电流互感器工作原理(国外英文资料) The purpose and working principle of zero sequence current transformer Zero sequence current transformer: this is a use of single-phase grounding fault line of the characteristics of the fault circuit zero sequence current value is not big, with current transformer to take out the zero sequence current signal relay action, realize the selective tripping or signal device. Features: for cable line, cable through the converter, zero sequence current transformer core as the primary winding, secondary winding around the iron heart and connecting with the current relay. There is no zero sequence current when normal operation or three-phase symmetrical short circuit. When the single-phase earth is ground, the ground capacitor current is through the core, the zero sequence current is shown on the secondary side, and the relay action is made. In short, its a cable and N line through the core. General electric current protection of current transformer is linked by: Full star connection of three-phase three relay: each phase has a current transformer, one relay Incomplete star connection of two phase two relays: only two phase current transformer and relay Two phase a differential relay connection: you can see by the name of two phase three relay of incomplete star connection: there are two current transformers, three relays for neutral point grounding system: zero sequence current (single-phase earth fault current) only applies to signal; For the neutral point grounding system: zero sequence current (single-phase earth fault current) on the trip General system of single phase short circuit protection are implemented using the overcurrent protection, overcurrent protection sensitivity is not enough when an only using the zero sequence current transformer Zero sequence current protection on the specific application in the three phase line and a current transformer (C.T) or for three-phase wire together, through the zero sequence C.T, also can install a zero