泵体零件的加工工艺和工装设计生本科论文.docVIP

2016届本科生毕业设计 论文分类号： TH162 题目：泵体零件的加工工艺和工装设计 摘 要 本次设计内容涉及了机械制造工艺及机床夹具设计、金属切削机床、公差配合与测量等多方面的知识。 泵体零件上往往都有各种不同用途和不同精度的孔需要加工。泵体零件的工艺规程及钻攻的工装夹具设计是包括零件加工的工艺设计、工序设计以及专用夹具的设计三部分。在工艺设计中要首先对零件进行分析，了解零件的工艺再设计出毛坯的结构，并选择好零件的加工基准，设计出零件的工艺路线；对零件各个工步的工序进行尺寸计算，关键是决定出各个工序的工艺装备及切削用量；然后进行专用夹具的设计，选择设计出夹具的各个组成部件，如定位元件、夹紧元件、引导元件、夹具体与机床的连接部件以及其它部件；计算出夹具定位时产生的定位误差，分析夹具结构的合理性与不足之处，并在以后设计中注意改进。 关键词：工艺； 切削用量； 夹紧； 定位； 误差 ABSTRCT This design content has involved the machine manufacture craft and the engine bed jig design, the metal-cutting machine tool, the common difference coordination and the survey and the various knowledge. Pump body parts are usually different purposes and accuracy of the hole machining. The reduction gear box body components technological process and the processing hole jig design includes the components processing the technological design, the working procedure design as well as the unit clamp design three parts. Must first carry on the analysis in the technological design to the components, understood the components the craft redesigns the semi finished materials the structure, and chooses the good components the processing datum, designs the components the craft route; After that is carrying on the size computation to a components each labor step of working procedure, the key is deciding each working procedure the craft equipment and the cutting specifications; Then carries on the unit clamp the design, the choice designs the jig each composition part, like locating the part, clamping the part, guiding the part, to clamp concrete and the engine bed connection part as well as other parts; Position error which calculates the jig locates when producing, analyzes the jig structure the rationality and the deficiency, and will design in later pays attention to the improvement. Keywords: Craft; Cutting specifications; Clamp; Localization; Error 目 录 绪论 1 1.1 国内外研究现状 1 1.2 机械加工工艺的概述 1 1.3 机床夹具概述 2 1.3.1 机床夹具的功能 2 1.3.2